Updating computer clock single parents dating cincinnati

Posted by / 05-Nov-2019 18:24

change each setting instead of using Set Automatically.

********************************************* Here is the result on the client C:\....w32tm /query /status Leap Indicator: 0(no warning) Stratum: 5 (secondary reference - syncd by (S)NTP) Precision: -6 (15.625ms per tick) Root Delay: 0.0312500s Root Dispersion: 16.0100000s Reference Id: 0x AC1E030C (source IP: Last Successful Sync Time: 9/9/2013 PM Source: Internal NPT.mydomain.local Poll Interval: 10 (1024s) ******************************************** Client config ******************************** C:\....w32tm /query /configuration [Configuration] Event Log Flags: 2 (Local) Announce Flags: 5 (Local) Time Jump Audit Offset: 28800 (Local) Min Poll Interval: 10 (Local) Max Poll Interval: 15 (Local) Max Neg Phase Correction: 4294967295 (Local) Max Pos Phase Correction: 4294967295 (Local) Max Allowed Phase Offset: 300 (Local) Frequency Correct Rate: 4 (Local) Poll Adjust Factor: 5 (Local) Large Phase Offset: 50000000 (Local) Spike Watch Period: 900 (Local) Local Clock Dispersion: 10 (Local) Hold Period: 5 (Local) Phase Correct Rate: 1 (Local) Update Interval: 30000 (Local) [Time Providers] Ntp Client (Local) Dll Name: C:\windows\system32\w32time.

About: I work offshore in Norway in the oil sector. Education : Skilled Industrial Mechanic, Skilled Aircraft Mechanic (Boeing737) ,and a degree as a Mechanical Technic... Added the DS1307 real time clock module instructions. Follow the instructions for setting the time and date.

This is NOT my idea, but I will try to show how I got this to finally work.

I thought i was my CMOS battery so I changed that out and it still is off every boot up.

I tried messing with the sync schedule to make it check more often to no avail. Let me know if you need any more information from me!

updating computer clock-73updating computer clock-6updating computer clock-16

Put it all together, and got the servos to work in a way. You will have to make small ,step by step adjustment to the Arduino file, and make notes how its behaving between each upload. Set the Plot Clock in calibration mode by removing // in front of #define CALIBRATION 2. The small servos was difficult to secure to the arms.